Our metric PVC aquarium / Pond solvent weld plumbing is ideal for various plumbing jobs in your aquarium or pond. In addition to the manufacturers standard warranty (usually 1 year) we also offer the opportunity for you to extend this warranty by a further 1 year for a one off fee. Black Waste pipe and fittings are strong and durable and will provide a permanent connection when secured with Solvent Cement. First, you should tidy up the cut you’ve made on the MDPE pipe – and it’s a good idea to chamfer the end if you’re working with a pipe over 40mm in diameter.

Black Waste Threaded Tank Connectors are unique in that they accept the same size Solvent Weld Pipe on either side of the fitting. The other end allows the pipe inside or you can connect a fitting to the outside, which should be glued with Solvent Weld Glue . Black Waste 90 Degree Bends should be used in conjunction with Black Waste Solvent Weld PVC pipework.A leading supplier of plumbing fittings, McAlpine comes with a variety of high-quality and competitive products to suit all plumbing solutions.

PVC fittings are manufactured in accordance with the following standards – WRAS, BS-EN1452, BS4346-1, ISO9001 and ISO14001. The Threaded Tank Connector has been designed like a socket/joining bush, allowing for a rigid pipe to be solvent welded on either side of the connector. Kockney Koi Threaded Tank Connectors are unique in that they accept the same size Solvent Weld Pipe on either side of the fitting.Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. The part is made up for 4 distinct sections – the overall threaded body with the compression fitting, 2 rubber washers, and a nut that sits on the ‘wet’ side (inside) of the tank.

However, this excludes damages caused by accidents, neglect or misuse of the Pvc Metric Pressure Pipe Tank Connector / Bulk Head. Pond plants are sent directly from our supplier to make sure the plants you receive are fresh and in great condition. Threaded Tank Connectors provide a secure, watertight way to connect Solvent Weld Pipework through the side wall of a filter box or water tank. Demountable Unions are ideal for positioning before and after Pumps, UVC’s and Filters to allow them to be easily removed for maintenance or replacement.Suitable for both indoor and outdoor applications and common place on hot tubs, whirlpool baths, spas and swimming pools. We take fraud very seriously so all credit and debit card transactions are subject to validation, authorisation and security checks by both the card issuer and ourselves. Please Note: Due to the design, these tank connectors reduce the diameter in the centre of the connector. These Reducers will fit directly into a pipe fitting of the larger stated size and allow a pipe of the smaller stated size to fit into it. The connecting black waste Pipework can then be glued into place using Solvent Weld Glue for a permanent connection.