Plasplugs Hollow Door Plugs & Drill Bit 20 Pack

£9.9
FREE Shipping

Plasplugs Hollow Door Plugs & Drill Bit 20 Pack

Plasplugs Hollow Door Plugs & Drill Bit 20 Pack

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Once level, use a screw or other thin pointed object to mark through the fixing holes on the hanging rail to show where you need to drill your fixing holes. Take two fixings and pop each one into a hole, pushing them in firmly so that the top of the plug sits flush with the door.

Plasplugs Hollow Door

In terms of fixing the batten to the door you have two choices; use the same hollow door fixings mentioned above or glue the batten in place using one of the many construction adhesives available today.Measure and mark the centre point of your batten around 30mm in from either end, drill out two small pilot holes and then countersink them ( see our guide here on pilot holes and countersinking for more information). For this tutorial we will be using some 2×1 inch planed batten, but you are free to use the correct size batten for your needs. As it’s planed we don’t need to sand it down, but if you are using just sawn batten, give it a good sand down first and once painted this will produce a good finish.

Which fixings for hinges of hollow door? | Screwfix Community Which fixings for hinges of hollow door? | Screwfix Community

Using standard screws are ok to a point but if any weight or pulling force is applied to them, in most cases they rip straight out, especially when fixing handles to hollow doors due to the forces applied to them when opening and closing the door itself. Allow 24 hours for the construction adhesive to fully dry and you can then remove the screws and fill the holes over before painting. In the following guide we look at some of the best methods of fixing to hollow doors and ensuring that the object you’re fixing actually stays in place on the door. Types of Hollow Door Fixings

The hooks above also feature a handy support to prevent it from dropping. In most cases if you are hanging heavy items, unless the fixing is supported from below as in the hook diagram above, the weight of the item will eventually cause the fixing to drop. Fixing a Batten to the Door For anything up to the weight of a t-shirt they’ll just about hold but for anything heavier a proprietary fixing needs to be used. For the purposes of this guide we are going to run through two of the above techniques for fixing to a hollow door. First we are going to use the purpose made hollow door fixings to fix a coat hanger rail to a hollow door and then we are going to secure a batten to the door using construction adhesive. Fixing to a Hollow Door Using Hollow Door Fixings The first job is to measure the width of the door near the top and find its centre and mark it with a pencil at the point on the door you want your hanger to be fixed.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop