This is even true when it comes to specialized drilling jobs that require a bit to bore out a hole in materials like wood or plastic. If you do need to make a lot of holes in a row, consider purchasing two or three bits that you can rotate in and out of use to prevent any of them from becoming damaged way too soon. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Once you’ve mounted a piece of backing into place, you can begin to prepare your hand drill for use. If you are still undecided about which brand or model to get, make sure to also check my guide to the best Forstner bit sets.

Famag Boremax Forstner Drills - Yandles Famag Boremax Forstner Drills - Yandles

These bits should be replaced or sharpened to prevent excessively tearing up the exterior of your workpiece.

However, if you plan to bore all the way through your workpiece, clear out any friction-causing saw dust and continue this process until popping out the other side (and into your sacrificial backing piece, ideally).

20mm Forstner Bit, Forstner Drill Bit 20mm for Wood HPHOPE 20mm Forstner Bit, Forstner Drill Bit 20mm for Wood

These Forstner bits are designed to give you increased edge contact, which means less tear out and a cleaner cut. Forstner bits are considered to be more versatile than spade bits, though, because they can effectively bore holes at an angle or on the edge of a work piece.Then, you can release the trigger and carefully slide the Forstner bit’s head out of the hole as it slows down to a stop.

Forstner Bits - UK Drills Forstner Bits - UK Drills

In most cases where a hand drill must be used in conjunction with a Forstner bit, a user’s targeted surface is already “in place.Then, place your workpiece on top of the sacrificial backing (this can also be a piece of scrap wood if this is your first time using this type of bit). This guide will teach you about all of that, even if you have no prior experience with this type of drill bits at all.