ASUS RT-AX92U AX6100 Tri-Band Whole Home Mesh Wi-Fi System Large and Multi-Story Homes, Supports Flexible SSID, Wired Inter-Router Connections, AiProtection, Network Security by Trend Micro, Pack of 1

Product Information

This was right at my wired PC with everything connected, eveything being the cable modem, the 2 DGL-4500’s, and a Netgear 8-port unmanned switch. As you mention it is not even a real wifi-6 mesh router. I have since then read quite a bit of your articles, but I can’t put my finger on the sore spot over here in my situation. Regarding the D/L, it was 10.7 Mbps, but then dropped mid test to the 1.7 Mbps, and when I tried to run a second test it wouldn’t connect to the server. Install/Update ASUS Router App (Android supports later than 1.0.0.5.44; iOS supports later than 1.0.0.5.41) But to cut to the chase, on the one hand, the RT-AX92U is a cute little tri-band Wi-Fi 6 router, almost perfect for a small home. On the other, when working as a mesh, its odd specs make things a bit complicated — you might mistake what you’ll get out of it.

The RT-AX92U shares the same web interface as other Asus routers and has the same set of network settings and features. It pushes the 92U’s memory usage (or at least displayed usage) to over 90% when idle. When turned off it idles at about 75%. I have reset the cable modem, and both routers. I just ran the Speedtest in the “try QoS” I am got the following results: I’m thinking about pairing two ASUS WiFi 6 routers via Ethernet, and part away from the Ubiquiti NanoStation setup. The 160MHz bandwidth may be unavailable in the 5GHz band in some regions/countries due to regulatory restrictions.

RT-AX86 Series(RT-AX86U/RT-AX86S)

Primary Broadband : FibreNet (RJ45-Ehternet output directly available from ISP) – Practically Unlimited Data. Clients who connect to the guest network can be viewed in the network map -->view list --> interface If I want better coverage in my house, I will need an extra node. (it only has 2 floors but is quite spread out (60×40 feet) It will be difficult to accomplish getting that third one wired. So after reading up on it it seems that I have a few options.

p.s. Australia’s NBN plans to have cheaper multi-gigabit around 2026 – so I have around 2 years perhaps with these units. Reply Also, clients that don’t support DFS might not be able to connect to it. Keep this in mind if you intend to use an RT-AX92U as a standalone router. A Wi-Fi 5 mesh system at its coreI understand that no router will make my internet faster. This set up has run flawlessly for many years without issue. Now my internet drops even if it is just my wife and I gaming on our phones. First of all, let me thank you for your thorough and complete review of these routers. Your knowledge, insight and thoroughness is much appreciated. We have new phones and laptops that are wifi 6 capable so I want that. We do have a wired connection to a bedroom/office where I could put the second unit. So my questions, if I understand the review my wired connection will preserve the wifi 6 for use rather than using it for the mesh connection? And second, is my best setup to install the first router at the DSL connection and then connect the second one by ethernet and mesh them? thanks for your help, routers are a foreign language for me. Reply You can raise these antennas upward for better coverage or collapse them on top of the router to make the whole thing even more adorable. Either way, the router works. By the way, the router is wall-mountable, which is always a nice touch. A little tri-band powerhouse My work computer is wired and I have 3 other computers that are 100% WiFi. My streaming setup is wired into the EA9500. All other wireless hardware are IoT devices (roughly 15). All wire is Cat6.

The router uses a dual-core 1.8 GHz processor, 512 MB of RAM, and 256 MB of flash memory for processing power. It’s not the most potent router I’ve seen but still quite impressive considering its tiny physical size. Asus RT-AX92U: Hardware specifications Could you share your light on this, because I’m running around in circles at present. I’ll be very grateful. Best regards Henk. Reply At its core, the RT-AX92U is like any other Asus router. You can set it up using its web user interface or the Asus Router mobile app. Fixed envrams exposed issue. Thanks to Quentin Kaiser from IoT Inspector Research Lab contribution.Should I really just be looking at the XT8 at this point to future proof? Are the speeds comparable?

My daughters Samsung Note 8 always connected to the main unit at 2.4GHz which is located on the ground floor (thus getting very slow speed), where as the node is located right outside her room, but the phone just refused to connect to the node. Any way to solve this issue?My Canon E480 wifi printer disconnected to any of the AX92U units after 1 week problem free usage. I had hard reset the printer, it just won’t connect. It manages to locate the SSID, asking whether to connect to one router or multiple routers, and I tried both, it just won’t connect. I tried another wifi printer, Canon E460, same issue.