Kreg KJDECKSYS20 Deck Jig

Product Information

Camo is pretty much professional level. It is made for professional people who carry more tools but need something efficient. So if you’re a beginner, don’t reach for the Camo tool. These boards come finished with two different profiles, giving you the ultimate flexibility and allowing you to get creative with your outdoor space. Please note: Should you need any additional screws, please use the Kreg 2" screws as these are made specifically for this system. These can be found at the bottom of this product in related items.

Deck Jig Vs. CAMO: Differences And What You Should Pick Kreg Deck Jig Vs. CAMO: Differences And What You Should Pick

The STANLEY Tylon tapes comply with European class II standards. This means the maximum permissible tolerance over 3 metres is less than a millimetre.With your spacer in place, pull the handle of the chisel to you to bring the board tight against the spacer. Then use your other hand to drive in the screw or nail. To select the correct glove size, simply measure across your palm at the point indicated in the last picture on this listing. Then compare your measurement with the chart below to ensure you select the correct glove size for your hand. Since 1843, Stanley has been delivering hardworking, innovative and powerful tools that tradespeople can trust and to help Pro’s get the job done better. Balau is a tropical hardwood. This is a very tight-grained wood, hence very hard-wearing and durable. And the best part is, this tool won’t cost you much more than lunch at your favorite fast food joint.

Deck Jig in the Woodworking Tool Accessories department Kreg Deck Jig in the Woodworking Tool Accessories department

With a razor-sharp cut point and ground, serrated lower thread, these screws will not split or splinter the wood even when used at the board's edge. The Predator Jet PU Work Gloves are lined with a 13 gauge seamless Polyester liner and have a Polyurethane palm coating. If you can acclimate your wood, cover it and make sure it is not sitting directly on the ground, so it doesn’t soak up rain or groundwater. Maybe the spacing isn’t quite right, or maybe you don’t want to deal with the creaking so you want a replacement.The Tiger Claw TC-G Hidden Fastener system by FastenMaster is ACQ-compliant and compatible with grooved boards including Trex, Fiberon, Wolf, Veranda, Brazilian Redwood, Ipe, Ironwood, Teak, Cambara, and more. A 1/8” gap can easily be accomplished through the use of an 8d nail. Lay the boards in place, using several 8d nails as spacers. While pushing the board flush against the spacers, secure the board into place with your choice of fastener. While nails are good spacer options, they can also be difficult to work with. Nails can easily slip out of your fingers or between the boards and onto the earth below. Conversely, dry cedar boards should be spaced 1/4″ apart to avoid damage when the material absorbs moisture and expands, narrowing that gap. Leave a 1/8″ space between butted ends as cedar will also expand lengthwise.